Week 14, 2003<\/p>\n
\u00a0Q) I have an NAD CD player that I purchased along with an NAD receiver about ten years ago, and it sounds great. \u00a0 Now the CD player needs repaired and I am having trouble finding a place to get it fixed. \u00a0 Can you recommend a repair station?<\/p>\n
-Mike Medwig, Greentree<\/p>\n
A) NAD makes some of the best equipment for getting high-end (John O- please use the “high-end” adjective) sound quality without breaking the bank. \u00a0 In particular, their older receivers are outstanding, delivering very clean, warm sound along with the ability to work with even the most power-hungry speakers. \u00a0 If you were writing to inquire about fixing the receiver, I would heartily recommend getting it repaired. \u00a0 However, repairing CD players is another story, even one from a premium manufacturer such as NAD. \u00a0 You are probably better off buying a new one.<\/p>\n
CD players are largely digital components, almost like a computer. \u00a0 The computer chip that makes the sound in a CD player is called a digital-to-analog converter. \u00a0 This chip takes the ones and zeros coming from the laser reading the CD and converts them to an analog waveform that is sent to an electrical output stage. \u00a0 The output stage sends this analog signal to your receiver through the red and white output jacks on the back of your player. \u00a0 Though the output stage has an effect on sound quality, it is the converter chip that has the biggest effect on sound quality.<\/p>\n
Now, consider this- what has happened to computer chips the past ten years? \u00a0 Performance has gone up and price has come down. \u00a0 CD players are no different. \u00a0 It’s quite probable that a popularly priced CD or DVD player of today will outperform more expensive, premium models made in the past because the newer one will have a more advanced digital-to-analog converter. \u00a0<\/p>\n
Bear in mind that differences in sound quality between CD and DVD layers are small in any event, but if you own NAD you care about your sound system. \u00a0 I’d recommend looking at an Onkyo or \u00a0 a new NAD model to replace your broken one.
\n \u00a0<\/p>\n
Q) Why doesn’t my DVD player recognize burned CDs or DVDs when the less expensive ones do?<\/p>\n
-R Crutcher<\/p>\n
A) Whether or not a DVD player can play or recognize burned DVDs and CDs depends on several factors: \u00a0 the laser used to read the disc, the software used by the chips in the DVD player, and other software and hardware design factor in the machine.<\/p>\n
Compatibility with one media type does not guarantee compatibility with another media type. \u00a0 For instance, in my own system I use an Onkyo DVD player that can play burned DVDs, but not burned CDs. \u00a0 When you think about it, this is somewhat odd as recordable CD-Rs predate recordable DVD-Rs by a number of years and one would think that the engineers designing the player would design it to be backward-compatible with an older format. \u00a0 Conversely, some DVD players can play burned CDs but not burned DVDs.<\/p>\n
Further complicating the problem, different brands of DVD media vary in their compatibility with home DVD players. \u00a0 Digital Video magazine recently tested many brands of DVD media and found some brands work better than others in home players. \u00a0 Apple Computer DVD-R media was found to be the most compatible, with Pioneer also drawing high marks. \u00a0 \u00a0 Fortunately blank CD-Rs do not exhibit the same kind of brand-to-brand compatibility problems as DVD-Rs.<\/p>\n
If a DVD player’s box says “CD, CD-RW, DVD-R compatible” you should be fine. \u00a0 Newer players are being produced with wide compatibility in mind, so this problem should disappear over time.<\/p>\n